Screen protector making machine troubleshooting

1

Cellphone film making machine troubleshooting-Replace screen

In the unfortunate event of a screen failure, you can quickly replace the failed part, and this video will show you how.
2

Cellphone film making machine troubleshooting-Replace rubber strip

After long-term use, the surface of the rubber strip is worn, which will affect the accuracy of cutting, this video will show you how to replace the rubber strip.
3

Cellphone film making machine troubleshooting-Reinstall system

If your improper operation causes the system to be lost or unable to start, don't worry, you can reinstall your system by the following operations.
4

Cellphone film making machine troubleshooting-No cutting

If the celllphone film making machine doesn't cutting, Please try the following steps.
5

Cellphone film making machine troubleshooting-Factory reset

How to reset the cellphone film making machine? By the following steps, you can reset your cutting machine
6

Cellphone film making machine troubleshooting-Crookedly cutting

You need to check if the driving trolley is loose when the cellphone film making machine is crookedly cutting
7

Cellphone film making machine troubleshooting: Blade holder calibration

If your cellphone film making machine doesn't work right, you need to check the blade holder, sometimes you may need to calibrate it.

1

MTB-CUT M188 Screen protector machine - install firmware

Wrong operations may cause systemic errors, such as upgrading the MTB-CUT M188 screen protector machine without network or power failure during the process, and the machine cannot be operated. In this case, you need to reinstall the firmware.
2

MTB-CUT M188 Screen protector machine - Factory reset

The factory reset function is mainly used to restore the MTB-CUT M188 machine to its original state, please note that the factory reset will clear all data, and it needs to be downloaded again, please make sure the machine is connected to the Internet.
3

MTB-CUT M188 Screen protector machine - Replace the spring

The spring of MTB-CUT M188 Screen protector machine mainly affects the force acting on the cutting material and whether the material is firmly fixed.
4

MTB-CUT M188 Screen protector machine - Replace the rubber strip

The rubber strip is mainly used to protect the blade from wear and ensure the consistency of cutting accuracy. After a long period of use, the rubber strip may need to be replaced. This video will show you how to replace the rubber strip.
5

MTB-CUT M188 Screen protector machine - replace the screen

This is our MTB-CUT M188 screen protector machine. In this video, we will show you the mechanism of the machine and how to replace the screen of MTB-CUT M188 screen protector machine quickly.