How to run the custom function of MTB-CUT 180T film cutting machine

  • Mietubl Global Supply Chain (Guangzhou) Co., Ltd.
  • 2022-08-06 14:54:21
  • 8740

Through the custom pattern function of MTB-CUT 180T film cutting machine, you can upload any patterns from the mobile phone and delivery them to back film. 

The following steps will guide you to complete the connection.

1. Install PrinterServer on computer

Computer and printer are necessary to run this function, you need to install Printerserver on your computer. Please click here to download the printer server.

After the download is complete, double-click to run the program.

To make sure the program runs properly, please DO NOT install the application in disk C:\ .

Printerserver application

2. Run the Printerserver

Insert the USB dongle into your computer and run the Printerserver, it will show as below.

Printerserver application

Click Help and copy the following link to your web browser: http://127.0.0.1:5000/photo/phone and run the  “Printer setting page”. If you've done everything right, you should see the interface below. If the screen below does not appear, go back and try the steps above.

Operation interface

So far, you can try clicking "Custom" and try loading images from local or network. Please keep the Printerserver running in the whole process.

3. Connect the screen protector machine and computer

Make sure the screen protector cutter is on the same network as the computer.

For some versions of the machine, you may need to enter the local IP address of the computer on the MTB-CUT 180T screen protector cutting machine, as shown in the picture below.

Input IP

If this happens to you, The Windows Command Prompt tool will help you to get your local IP4 address.

Open the Start menu and type cmd. Enter “ipconfig” into the Command Prompt and press Enter, we will see the IP4 address inside the list.

Get IP address

You can just skip this step if it doesn't ask you.

4. Scan QR code to upload picture

Make sure your cellphone is under the same network as the computer. Choose the phone model you want to customize back film, click the right top image button, Scan the QR code with any scan tool and upload pictures from phone to cutter.

Upload picture

Please note that your mobile phone should under the same network as the computer which running the Printerserver. And the recommended image for uploading is no more than 10M.

When upload finish, you can move, select paintbrush and color to make drawing.

Move and paint.

The most important thing is to make sure the screen protector machine, computer, printer and mobile phone are under the same network. For more details, please refer to the help panel on the Printerserver.

In some versions of the operating system, Printerserver may be blocked by firewall or antivirus software due to false alarms. In this case, Printerserver can be added to the whitelist and the Printerserver can be allowed to pass through the firewall. Or temporarily turn off the firewall in your computer.

Allow firewall

You may need to add a new paper size to your printer (Paper Width: 119 mm, Paper Height: 185 mm) for better printing results. Due to the different operation methods of different printing models, it is recommended to refer to the instruction manual of the printer.

Paper size setting

You can visit the link below(https://www.mietubl.com/videos/43.html) for more video introductions. Click here to download the documentation instructions.